i like this post (click again to cancel)
1
i dont like this post (click again to cancel) remove favorite mark from this question (click again to restore mark)

Hi and thanks for answering my prev. questions! Decided to ask this one:

How can I convert fid data (ser file) to plain text openable in programmes like Origin? Would really like to know how to do this in Topspin and XWinNMR.

Thank you!!!

asked Jan 06 '10 at 13:12

Magnethead's gravatar image

Magnethead
42

updated Jan 06 '10 at 14:51


3 Answers:
i like this answer (click again to cancel)
4
i dont like this answer (click again to cancel)

A simple way to do this is with the "od" (octal dump) command which is standard on Linux (and may be available under Cygwin for Windows). Use, in the directory containing the fid:

od -An -i -v -w4 fid > fid.txt

which will create a file fid.txt containing the data in readable form, one number per line. If you're doing this on an ser file the result may be quite large! This can also be used on 1r, 2rr etc... Note that you will not have the time/frequency that corresponds to each point, just the intensity of each fid point.

I should add that you probably need to convert digital data to analogue first with "convdta" in Topspin before running this. On older systems e.g. RHEL4 the syntax is slightly different:

od -An -t dI -v -w4 fid > fid.txt

added: 20 Jan 2010

To tell if byte swapping (converting from one endianness to another) is necessary look at the BYTORDA parameter in the acqus file. If it is 1 (on a Linux system) then you need to swap the byte order of the data for od to work correctly. A command to do this is:

ls fid | cpio -o | cpio -i --swap -u

Once run you will need to edit the acqus file so that BYTORDA = 0 or Topspin will not be able to process the fid correctly.

Finally, if the data is floating point rather than integer, od probably wont work (check parameter DTYPA in acqus - should be 0 for integer).

H

link

answered Jan 14 '10 at 10:59

anglican's gravatar image

anglican
66

updated Jan 20 '10 at 02:10

wow, that's really neat that no special software is needed. Thanks! - Magnethead (Jan 14 '10 at 13:06)

i like this answer (click again to cancel)
1
i dont like this answer (click again to cancel)

the simple way for ur problem is ,open spectra in topspin-file-save-save data of current displayed region in a text file or save data in zip flie..these commands are availble in topspin2.1 if it not availble just type tozip or tojcampdx in command menu..

link

answered Jul 16 '10 at 20:26

sashi's gravatar image

sashi
41

i like this answer (click again to cancel)
1
i dont like this answer (click again to cancel)

you can also type convfid2asc for the conversion of FID's to a csv type file. convbin2asc willdo the same for spectra. Both of these commands are for 1D data only.

link

answered Jul 23 '10 at 21:23

Clemens%20Anklin's gravatar image

Clemens Anklin
336

Your answer
Please start posting your answer anonymously - your answer will be saved within the current session and published after you log in or create a new account. Please try to give a good answer, for discussions, please use comments and please do remember to vote (login to vote)
toggle preview

powered by CNPROG