0 |
0 |
1k |
answers |
votes |
views |
Hi,
If the probe temperature increases inadvertently What should be done to reduce the temperature.
Thank you
...
0 |
0 |
1k |
answers |
votes |
views |
Hi Dear
recently i see error the prob not found
i do command "edhead" and then atmm and after that the problem be solved...
5 |
0 |
4k |
answers |
votes |
views |
Hi,
We have a Bruker MAS probe (4mm, late 90s vintage, widebore) that reports a spin speed twice what it is actually doi...
2 |
1 |
14804 |
answers |
votes |
views |
Hi All,
This may be a daft question, but how do I go about identifying the probe in our NMR machine, and hence whether ...
2 |
0 |
8k |
answers |
votes |
views |
If you remove and later (not too much later) reinstall the probe and you are confident that
probe position inside the ma...
1 |
1 |
25159 |
answers |
votes |
views |
What makes very strong signals broader - just due to the interaction of the sample with the detection coil - what is the...
5 |
1 |
10096 |
answers |
votes |
views |
I'm trying to come up with reasonable tests of probe performance for all channels by simulating conditions at which arci...
1 |
0 |
5k |
answers |
votes |
views |
I've found that one of our probes lost ~1.5-2 dB of power on 13C, but nutation curve looks OK. There are no random spike...
1 |
0 |
10840 |
answers |
votes |
views |
Hello, could someone share directions on how to tune and match NMR probe RF circuit using a network analyzer? We have a ...
2 |
1 |
7k |
answers |
votes |
views |
What may happen if probe tuning/matching is not perfect besides loss in the sensitivity, any more subtle details?
Whoul...