2 |
0 |
4k |
answers |
votes |
views |
Hello, does anyone know whether the instrument is busy or not by logging in remotely?
How do you do that on the platfor...
2 |
0 |
8k |
answers |
votes |
views |
If you remove and later (not too much later) reinstall the probe and you are confident that
probe position inside the ma...
1 |
0 |
5k |
answers |
votes |
views |
Hello,
I've noticed recently that our EPR spectrometer (Bruker EMX500) has a negative offset on the baseline and it bec...
2 |
0 |
4k |
answers |
votes |
views |
Hello, I need to help solids lab at our UCI site - they have a custom probe and need to orient it properly in order to e...
5 |
1 |
10167 |
answers |
votes |
views |
I'm trying to come up with reasonable tests of probe performance for all channels by simulating conditions at which arci...
1 |
0 |
5k |
answers |
votes |
views |
I've found that one of our probes lost ~1.5-2 dB of power on 13C, but nutation curve looks OK. There are no random spike...
2 |
1 |
5k |
answers |
votes |
views |
Hello, I've been working through the probe performance tests and noticed that when I change pfgon='yyy' to pfgon='nyn' l...
1 |
0 |
10896 |
answers |
votes |
views |
Hello, could someone share directions on how to tune and match NMR probe RF circuit using a network analyzer? We have a ...
2 |
1 |
7k |
answers |
votes |
views |
What may happen if probe tuning/matching is not perfect besides loss in the sensitivity, any more subtle details?
Whoul...
0 |
0 |
3k |
answers |
votes |
views |
What setup do you use to measure EPR at temperatures above room temperature?
We have a Bruker EMX500 instrument and we...