Revision history [back]
click to hide/show revision 1
initial version

posted Dec 08 '14 at 22:48

Frey's gravatar image

Frey
61

;cpdarr(TopSpin 2.1) ;spin diffusion with DARR, ;13C?1H dipolar-assisted rotational resonance in magic-angle spinning NMR ;K. Takegoshi, Shinji Nakamura and Takehiko Terao ;"13C-1H dipolar-assisted rotational resonance in magic-angle spinning NMR" ;rotor synchronized, set cnst31=spin rate, spin rate regulation ;recommended ;Avance III version ;parameters: ;d1 : recycle delay ;d0 : =1u, t1 evolution period ;in0 : = 1/swh{F1}, sw1=sw2 ;pl1 : X power level ;pl11 : power level for X pulses ;sp0 : proton power level during contact ;pl2 : =120dB, not used ;pl12 : power level for H 90 and standard proton decoupling ;pcpd2 : pulse length in decoupling sequence ;p15 : contact time at pl1 (f1) and pl2 (f2) ;p10 : pulse length for FSLG shape ;p3 : H 90 degree pulse ;p1 : X 90 degree pulse ;p2 : adiabatic refocussing pulse, usually 1 rotation period ;cpdprg2 : sequence used for decoupling (tppm15, cw, etc.) ;cpdprg1 : cw13, set pl13 to RF-field n*spin rate, n=1-3 or 120 dB for PDSD ;spnam0 : file name for variable amplitude CP ;cnst21 : =0, proton offset ;cnst31 : spinning frequency ;l1 : number of rotor cycles for mixing time, 10-100 msec mix should do ;FnMode : STATES-TPPI ;$COMMENT=exchange NMR (PDSD, DARR) in rotating solids, rotor synchronized ;$CLASS=Solids ;$DIM=2D ;$TYPE=cross polarisation ;$SUBTYPE=homonuclear correlation ;$OWNER=Bruker define loopcounter count "count=td1/2" define delay tau "tau=1s/cnst31-p2/2" "d31=1s/cnst31" define delay mix "mix=l1*d31" ;cnst11 : to adjust t=0 for acquisition, if digmod = baseopt "acqt0=1u*cnst11" "in0=inf1" 1 ze mix d31 #include #include ;make sure p15 does not exceed 10 msec ;let supervisor change this pulseprogram if ;more is needed #include ;allows max. 50 msec acquisition time, supervisor ;may change to max. 1s at less than 5 % duty cycle ;and reduced decoupling field 2 d1 do:f2 rpp4 2u fq=cnst23:f2 2u fq=cnst22:f2 2u fq=cnst21:f2 (p3 pl12 ph1):f2 (p15 pl1 ph2):f1 (p15:sp0 ph10):f2 d0 cpds2:f2 (p1 pl11 ph3):f1 (1u cpds1):f2 5 tau ;mixing time with DARR mixing lo to 5 times l1 (p1 pl11 ph5):f1 (1u cpds2):f2 go=2 ph31 1m do:f2 100m wr #0 if #0 zd 1m ip2 lo to 2 times 2 1m id0 lo to 2 times count HaltAcqu, 1m 6 exit ph1=1 3 ph2=0 ph3= 0 0 0 0 2 2 2 2 ph5=0 0 0 0 0 0 0 0 2 2 2 2 2 2 2 2 ph10=0 0 2 2 ph31=0 2 2 0 2 0 0 2 2 0 0 2 0 2 2 0
click to hide/show revision 2
No.1 Revision

posted Dec 08 '14 at 22:53

Frey's gravatar image

Frey
61

;cpdarr(TopSpin 2.1) ;spin diffusion with DARR, ;13C?1H dipolar-assisted rotational resonance in magic-angle spinning NMR ;K. Takegoshi, Shinji Nakamura and Takehiko Terao ;"13C-1H dipolar-assisted rotational resonance in magic-angle spinning NMR" ;rotor synchronized, set cnst31=spin rate, spin rate regulation ;recommended

;Avance III version ;parameters: ;d1 : recycle delay ;d0 : =1u, t1 evolution period ;in0 : = 1/swh{F1}, sw1=sw2 ;pl1 : X power level ;pl11 : power level for X pulses ;sp0 : proton power level during contact ;pl2 : =120dB, not used ;pl12 : power level for H 90 and standard proton decoupling ;pcpd2 : pulse length in decoupling sequence ;p15 : contact time at pl1 (f1) and pl2 (f2) ;p10 : pulse length for FSLG shape ;p3 : H 90 degree pulse ;p1 : X 90 degree pulse ;p2 : adiabatic refocussing pulse, usually 1 rotation period ;cpdprg2 : sequence used for decoupling (tppm15, cw, etc.) ;cpdprg1 : cw13, set pl13 to RF-field n*spin rate, n=1-3 or 120 dB for PDSD ;spnam0 : file name for variable amplitude CP ;cnst21 : =0, proton offset ;cnst31 : spinning frequency ;l1 : number of rotor cycles for mixing time, 10-100 msec mix should do ;FnMode : STATES-TPPI

;$COMMENT=exchange NMR (PDSD, DARR) in rotating solids, rotor synchronized ;$CLASS=Solids ;$DIM=2D ;$TYPE=cross polarisation ;$SUBTYPE=homonuclear correlation ;$OWNER=Bruker ;$OWNER=Bruker

define loopcounter count "count=td1/2" count

"count=td1/2"

define delay tau "tau=1s/cnst31-p2/2" "d31=1s/cnst31" tau

"tau=1s/cnst31-p2/2"

"d31=1s/cnst31"

define delay mix "mix=l1d31" mix

"mix=l1*d31"

;cnst11 : to adjust t=0 for acquisition, if digmod = baseopt "acqt0=1ucnst11" baseopt

"acqt0=1u*cnst11"

"in0=inf1"

1 ze mix d31 ze

mix

d31

#include <rot_prot.incl> <rot_prot.incl>

#include <p15_prot.incl> ;make sure p15 does not exceed 10 msec ;let supervisor change this pulseprogram if ;more is needed

#include <aq_prot.incl> ;allows max. 50 msec acquisition time, supervisor ;may change to max. 1s at less than 5 % duty cycle ;and reduced decoupling field <aq_prot.incl>

2 d1 do:f2

rpp4 rpp4

2u fq=cnst23:f2 fq=cnst23:f2

2u fq=cnst22:f2 fq=cnst22:f2

2u fq=cnst21:f2 fq=cnst21:f2

(p3 pl12 ph1):f2 ph1):f2

(p15 pl1 ph2):f1 (p15:sp0 ph10):f2 ph10):f2

d0 cpds2:f2 cpds2:f2

(p1 pl11 ph3):f1 (1u cpds1):f2 cpds1):f2

5 tau ;mixing time with DARR mixing mixing

lo to 5 times l1 l1

(p1 pl11 ph5):f1 (1u cpds2):f2 cpds2):f2

go=2 ph31 ph31

1m do:f2 do:f2

100m wr #0 if #0 zd zd

1m ip2

lo to 2 times 2 2

1m id0 id0

lo to 2 times count count

HaltAcqu, 1m 1m

6 exit

ph1=1 3 ph2=0 3

ph2=0

ph3= 0 0 0 0 2 2 2 2 2

ph5=0 0 0 0 0 0 0 0 2 2 2 2 2 2 2 2 2

ph10=0 0 2 2 2

ph31=0 2 2 0 2 0 0 2 2 0 0 2 0 2 2 0

powered by CNPROG